Live Chat Support Software
 
 
 
 
 
 

Cam Lock Accessories
and Cams

cam lock accessories FJM Security
Products
Online Catalog 
here.

Finger Pull

cam lock finger pull cam lock finger pull Easily add a handle to your application.

The FJM Finger Pull is easy to install on any of your cam locks (including our Combi-Cams) by simply slipping it over the cylinder prior to installing the lock.

plastic cam lock finger pull plastic cam lock handle Easily add a handle to your application with black acrylic plastic handle.

The FJM Finger Pull is easy to install on any of your cam locks (does not work on Combi-Cams) by simply slipping it over the cylinder prior to installing the lock.
 

Note the thickness of the finger pull and subtract form the total reach of the lock.

Prong Washer For Wood Applications- Adds additional grip

 

Teeth dig into the wood to hold into place.  Two holes for screws (not included) can add to further grip of the lock in a wood application.

Dust Covers

cam lock dust cover

Normal Cam Locks
Dust cover protects lock from the elements

The FJM Finger dust cover fits most of our keyed cam locks. 

 
cam lock dust cover
 
cam lock dust cover

cam lock dust cover

Miniature Cam Locks
Dust cover protects lock from the elements

The FJM Finger dust cover fits our miniature cam locks and plunger locks as well.

 

Combi-Cam and Large Format Cam Locks
Dust cover protects lock from the elements

The FJM Finger dust cover fits the Combi-Cam and larger face cam locks.

 

metal dust cover A1141- Metal Dust Cover 

Dust cover protects lock from the elements

Spring loaded to snap tight with additional foam seal around key hole inside.

Hardened Spin Collar Shield for Cam Locks
protective collar ring for cam locks The free spinning shielded collar is easy to install on any of our standard cam locks.   It is hardened to h resist attacks and it spins freely to prevent wrenching or torquing the lock itself.  To install the collar simply slip the cam lock through the collar prior to installing the lock.  When ordering, please keep in mind that the spin collar does double as a small spacer, so be aware that you may need to add approximately 3/16"  (5 mm) to the required length of the cam lock you are ordering for proper fit with your existing device. 

Cam Lock Spacer Collars

cam lock spacer ringcam lock spacer rings
The spacer collars install between the face of the cabinet and the the face of the cabinet lock and pulls the cam lock forward between 1/8" to 3/4" depending on which collar ring is used.

 

Typical Cam Lock Installations

cam lock installation

Key Covers


Normal

Miniature

 

 

Cams-  100 Series

cam lock accessories

Cams-  200 Series

cabinet lock cams
Cams-  300 Series

cams

Strikes-

A1004

slotted strikes     

cabinet lock strike
 

2540


brass strike plates         

No. 2540 1-15/16 x 7/16 x 3/16
1-17/32 c. to c. screw holes

7S


slotted brass strikes         

No. 7S 1-15/16 x 17/32 x 3/64 1-9/16 c. to c. screw holes Bolt hole: 9/32 x 29/32


12S


slotted cabinet strike plate         

No. 12S 2-1/8 x 15/32 x 1/16 1-11/16 c. to c. screw holes Bolt hole: 9/32 x 61/64

 

 

 

   

 


Site Map   |  HitchSafe   |  ShurLok   |  Combi-Bolt   |  Combi-Ratchet   |  Combi-Cam   |  SOBO Locks   |  Key Cabinet   |  Brass Padlocks  

   copyright 2017